top of page

Mini Dragon Group (ages 6-7)

Public·28 members
Abdelhamid Charef
Abdelhamid Charef

Bosch Kts 520 Drivers

Bosch KTS 520 Drivers: How to Install and Use Them

The Bosch KTS 520 is a diagnostic tool that allows you to perform various tests and functions on vehicles. It can communicate with the vehicle's electronic control units (ECUs) via the OBD-II interface or the manufacturer-specific connectors. To use the KTS 520, you need to install the appropriate drivers and software on your computer.

What are the Bosch KTS 520 drivers?

The Bosch KTS 520 drivers are software components that enable your computer to recognize and communicate with the KTS 520 device. They are required for the proper functioning of the KTS 520 and the diagnostic software that you use with it, such as ESI [tronic] 2.0 or Bosch PassThru.


How to install the Bosch KTS 520 drivers?

To install the Bosch KTS 520 drivers, you need to follow these steps:

  • Connect the KTS 520 to your computer via the USB cable.

  • Turn on the KTS 520 by plugging it into a power source or connecting it to a vehicle's OBD-II port.

  • If your computer does not automatically detect the KTS 520, you may need to manually install the driver for the CP2101 USB to UART bridge controller. You can download this driver from [here].

  • Run the driver installation file and follow the instructions on the screen.

  • After installing the driver, your computer should recognize the KTS 520 as a COM port device.

  • You can now install the diagnostic software that you want to use with the KTS 520, such as ESI [tronic] 2.0 or Bosch PassThru.

How to use the Bosch KTS 520 with ESI [tronic] 2.0?

ESI [tronic] 2.0 is a comprehensive diagnostic and testing software from Bosch that covers a wide range of vehicles and systems. It provides various functions such as reading and clearing fault codes, displaying live data, performing actuator tests, coding and programming, service reset, and more. To use the KTS 520 with ESI [tronic] 2.0, you need to follow these steps:

  • Install ESI [tronic] 2.0 on your computer using the Diagnostics Download Manager (DDM). You can download the DDM from [here].

  • The DDM will assign your specific software package to you and download the latest updates for ESI [tronic] 2.0 automatically.